How To Install HPSMH + HPADU + HPACU-CLI On CentOS

How To Install HPSMH + ADU + HPACU-CLI :

1. yum install compat-libstdc++-33.i386 compat-libstdc++-33.x86_64 compat-libstdc++-296.i386

2. wget -nd ftp://ftp.hp.com/pub/products/servers/supportsoftware/linux/hpadu-7.70-12.linux.rpm

wget -nd ftp://ftp.hp.com/pub/products/servers/supportsoftware/linux/hpacucli-7.70-12.linux.rpm

wget -nd http://geraklian.org/hpsmh-6.2.1-14.i386.rpm

3. rpm -ivh hpsmh-6.2.1-14.i386.rpm

rpm -ivh hpadu..

rpm -ivh hpaccli..

4. command hpacucli:

hpacucli

> ctrl all show status

>ctrl all show config

References :

1. ftp://ftp.hp.com/pub/products/servers/supportsoftware/linux/

2. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3288132&prodTypeId=15351&prodSeriesId=397634&swLang=8&taskId=135&swEnvOID=4006

3. http://koo.fi/tech/2008/06/08/hp-array-configuration-and-diagnostic-utilities-on-linux/

How To Setup NFS on CentOS

How to setup NFS on CentOS:

1. Server Side :

- kena install nfs,nfs utils,portmap :

# yum install nfs-utils nfs4-acl-tools portmap

- kena allow file ape yg nak share dan ip mane allowed kt /etc/export :

/backup/srv77 192.168.0.3(rw,sync,no_root_squash,fsid=0)

- kena allow portmap kt /etc/hosts.allow :

portmap: 192.168.0.0/255.255.255.0, 10.0.0.0/255.0.0.0

portmap: 192.168.0.4/255.255.255.0

- kena allow ip kt firewall,iptables or csf :

192.168.0.3

- kena set service nfs dan portmap kt initial setup :

chkconfig --level 235 nfs on

chkconfig --level 235 portmap on

- kena start service nfs dan portmap :

/etc/init.d/nfs start

/etc/init.d/portmap start

2. Client side :

- kena install nfs,nfs utils,portmap :

# yum install nfs-utils nfs4-acl-tools portmap

- kena create folder utk mount :

mkdir /mnt/srv4

- kena add kt /etc/fstab :

192.168.0.4:/backup/srv77 /mnt/srv4 nfs rw,hard,intr 0 0

- kena allow ip kt firewall,iptables or csf :

192.168.0.4

- kena set service nfs dan portmap kt initial setup :

chkconfig --level 235 nfs on

chkconfig --level 235 portmap on

- kena start service nfs dan portmap :

/etc/init.d/nfs start

/etc/init.d/portmap start

- kena add usef nfs :

useradd nfs -u 1000

- kena mount nfs to /mnt/srv4 :

mount -t nfs 192.168.0.4:/backup/srv77 /mnt/srv4 atau

mount -t nfs -o rw 192.168.0.4:/backup/srv77 /mnt/srv4

- nak remount nfs

mount -o remount,defaults,ro /mnt/Qbackup

or

mount -o remount,defaults,rw /mnt/Qbackup

instead of

mount -o remount,rw /mnt/Qbackup

COMMAND LAIN :

mount | grep -i '192.168.0.4'

nfsstat